Quality Filters and Pumps

Well Water Filtration in Orlando, FL

Quality Filters And Pumps provides well water filtration for homes throughout Orlando, Florida and the surrounding Orange County. Every job starts with a written quote and an on-site evaluation, not a phone estimate. Owners Chase and Katie Norris run a state-licensed Florida well-drilling and pump company (License #7494) with 15+ years serving Central Florida.

Why Orlando Homes Choose Quality Filters And Pumps for Well Water Filtration

Orlando (approximately 320,000 residents, in Orange County) is served by Orlando Utilities Commission (OUC). The municipal supply comes from groundwater drawn from the Floridan Aquifer through multiple OUC well fields, treated and distributed across the Orlando service area. Many homes in the surrounding unincorporated areas still draw from private wells, where the same regional groundwater chemistry applies.

For private wells, we test on site before sizing anything. For wider context, see our full well water filtration guide.

How Our Well Water Filtration Process Works

Whole-house well water filtration for Central Florida homes. Iron removal, hydrogen sulfide removal, sediment, low-pH neutralization, water softening, and point-of-use reverse osmosis sized to the actual water from your well.

Every job starts with a real on-site visit. We do not size a pump, recommend a filter, or quote a well off a phone call. For deeper background on this work, read Whole-House Well Water Filtration: What Central Florida Homeowners Need to Know or our Well Water Filtration service page.

What's Included

  • On-site water test for iron, hardness, hydrogen sulfide, pH, and TDS
  • Sequenced treatment design (oxidation, filtration, softening, RO as needed)
  • Air-injection oxidation systems for iron and sulfur
  • Catalytic carbon and birm media installation for combined iron and sulfur
  • Water softener sizing and brine-tank programming
  • Calcite neutralizer installation for low-pH surficial-aquifer wells
  • Under-sink reverse osmosis for drinking-water polish
  • Plumbing tie-in, drain line, and bypass loop installation
  • Walkthrough, maintenance schedule, and follow-up test after break-in

For more on equipment selection and the regional water chemistry behind our recommendations, see our company overview, the related Iron and Sulfur in Well Water: Marion and Alachua County article, and our water-quality reference page.

Orlando-Specific Considerations

Orlando sits in Orange County. The water you draw, drink, or irrigate with is regulated by Orlando Utilities Commission (OUC) for service-connection customers, and by the relevant Florida Water Management District and the county health department for private-well owners.

Regional notes that tend to apply here:

  • OUC reports its drinking water as moderately hard; private wells in the Orange County area commonly test in the 10 to 25 grains per gallon range (source)
  • wells drawing from the surficial aquifer in eastern Orange County may carry elevated iron and hydrogen sulfide compared with Floridan Aquifer wells (source)

For the live municipal numbers, pull Orlando's most recent Consumer Confidence Report directly from the utility. For wells, the only number that matters is the one from your own water, which is why every job starts with an on-site test.

Service Area: Orlando Neighborhoods and ZIPs

We serve homeowners across Orlando. Common neighborhoods we work in include Lake Nona, Baldwin Park, Audubon Park, College Park, Dr. Phillips, Thornton Park, plus the broader Orange County area. Primary ZIP codes: 32801, 32803, 32804, 32806, 32807, 32808, 32812, 32814, 32817, 32819, 32827, 32828, 32835, 32839. Outside this list? Call us anyway, most of Central Florida is in our normal service zone. Schedule a free quote or call (352) 268-9048.

Looking at a neighboring city or a different service? See Well Water Filtration in Kissimmee, FL or Well Drilling in Orlando, FL.

Frequently Asked Questions

What's the most common well water problem in Orlando?

For wells drawing from the Floridan Aquifer, the dominant complaints are hardness (visible scale on aerators and inside water heaters), hydrogen sulfide (the rotten-egg smell, strongest on the hot side), and iron staining on fixtures and laundry. A properly designed system targets all three in sequence.

Will a softener fix my iron and sulfur problem?

Only for very light cases. Once iron exceeds about three parts per million or hydrogen sulfide is present, a softener alone fouls the resin and never fully removes the contaminants. We size oxidation and catalytic media as a separate stage upstream of the softener.

Do I need to test my well water before you size a system in Orlando?

Yes. We test on site as part of the free consultation. Sizing a system off a regional average instead of your actual water is the leading cause of underperforming systems. The test takes about thirty minutes and we explain every number before we recommend equipment.

How long do whole-house well filtration systems last?

The tanks and control valves are designed for 10 to 15 years of service. Catalytic carbon and birm media typically last five to eight years on Central Florida well water. Softener resin lasts eight to twelve. We document a replacement schedule on every invoice.

Related Resources

Ready to fix the water at your Orlando home?

Free quote. On-site evaluation. A written scope before any work starts.

Social preview image: Non Chemical Water Softener by Skymech9649, CC BY-SA 4.0, via Wikimedia Commons.